• The thermocouple signal is very small and must be amplified by considerable gain before it can be properly sampled by most ADCs.

• The AD8495 thermocouple amplifier provides a simple, low-cost solution for thermocouple temperature measurement. The integrated temperature sensor performs cold junction compensation.

• The fixed gain instrumentation amplifier amplifies the small voltage of the thermocouple to provide a 5 mV/°C output.

• The amplifier has high common-mode rejection and is capable of rejecting common-mode noise that may be picked up by long leads of thermocouples. For extra protection, the amplifier's high-impedance input allows for easy additional filtering.

• The AD849x output is a voltage proportional to the thermocouple measurement junction temperature (TMJ). To derive the measured temperature from the AD849x output voltage, use the transfer function TMJ=(VOUT−VREF)/(5mV/°C), VOUT=(TMJ×5mV/°C)+VREF. The AD8495 and AD8497 (Type K) instrumentation amplifiers have a gain of 122.4. With a single 5V supply, the 5mV/°C output allows these devices to cover a thermocouple temperature range of nearly 1000 degrees.

• Reference pin provides offset adjustment

• Thermocouple disconnection detection

• Laser wafer adjustment to 1°C initial accuracy and 0.025°C/°C ambient temperature suppression

• Low power consumption: <1 mW (VS = 5 V)

• Rugged input withstands 4kVESD and provides overvoltage protection (OVP) up to VS±25V

• Linearity error less than ±2°C, this error is only caused by the nonlinearity of the thermocouple

• +IN: Positive input,

• -IN: negative input,

• VOUT: output

• REF reference input voltage: 1.24V, due to Q1 regulator limit, VCC maximum 18V, 5V recommended

Package includes:

1 X ARMZ Thermal Precision Analog Output K-Type Thermocouple Amplifier Module AD8495

Note: all the descriptions and prices are subject to change without prior notice.

Free Shipping: No

Shipping Weight/Unit(g): 0.00

Std. Packing Qty. (pcs): 1

Report an Error (Win $10 Prize)